NAME¶

auto.master - Master Map for automounter

DESCRIPTION¶

The auto.master map is consulted to set up automount managed mount points when the autofs(8) script is invoked or the automount(8) program is run. Each line describes a mount point and refers to an autofs map describing file systems to be mounted under the mount point.

The default location of the master map is /etc/auto.master but an alternate name may be given on the command line when running the automounter and the default master map may changed by setting the MASTER_MAP_NAME configuration variable in /etc/sysconfig/autofs. If the master map name has no path then the system Name Service Switch configuration will be consulted and each of the sources searched in line with the rules given in the Name Service Switch configuration.

Access to mounts in maps is governed by a key.

For direct maps the mount point is always specified as:

/-

and the key used within the direct map is the full path to the mount point. The direct map may have multiple entries in the master map.

For indirect maps access is by using the path scheme:

/mount-point/key

where mount-point is one of the entries listed in the master map. The key is a single directory component and is matched against entries in the map given in the entry (See autofs(5)).

Additionally, a map may be included from its source as if it were itself present in the master map by including a line of the form:

+[maptype[,format]:]map [options]

and automount(8) will process the map according to the specification described below for map entries. Indirect map entries must be unique in the master map so second and subsequent entries for an indirect mount point are ignored by automount(8).

FORMAT¶

Master map entries have three fields separated by an arbitrary number of spaces or tabs. Lines beginning with # are comments. The first field is the mount point described above and the second field is the name of the map to be consulted for the mount point followed by the third field which contains options to be applied to all entries in the map.

The format of a master map entry is:

mount-point [map-type[,format]:]map [options]

mount-point

Base location for the autofs filesystem to be mounted. For indirect maps this directory will be created (as with mkdir -p) and is removed when the autofs filesystem is umounted.

map-type

Type of map used for this mount point. The following are valid map types:

format

Format of the map data; currently the formats recognized are sun, which is a subset of the Sun automounter map format, hesiod, for hesiod filesys entries and amd for amd formated map entries. If the format is left unspecified, it defaults to sun for all map types except hesiod unless it is a top level amd mount that has a configuration entry for the mount point path, in which case the format used is amd.

map

Name of the map to use. This is an absolute UNIX pathname for maps of types file or program, and the name of a database in the case for maps of type yp, nisplus, or hesiod or the dn of an LDAP entry for maps of type ldap.

options

Any remaining command line arguments without leading dashes (-) are taken as options (-o) to mount. Arguments with leading dashes are considered options for the maps and are passed to automount (8).

The sun format supports the following options:

BUILTIN MAP -hosts¶

If "-hosts" is given as the map then accessing a key under the mount point which corresponds to a hostname will allow access to the exports of that host. The hosts map cannot be dynamically updated and requires a HUP signal to be sent to the daemon for it to check hosts for an update. Due to possible hierarchic dependencies within a mount tree, it might not be completely updated during the HUP signal processing.

For example, with an entry in the master map of /net -hosts accessing /net/myserver will mount exports from myserver on directories below /net/myserver.

NOTE: mounts done from a hosts map will be mounted with the "nosuid,nodev,intr" options unless overridden by explicily specifying the "suid", "dev" or "nointr" options in the master map entry.

LDAP MAPS¶

If the map type ldap is specified the mapname is of the form [//servername/]dn, where the optional servername is the name of the LDAP server to query, and dn is the Distinguished Name of a subtree to search for map entries. The old style ldap:servername:mapname is also understood. Alternatively, the type can be obtained from the Name Service Switch configuration, in which case the map name alone must be given.

If no schema is set in the autofs configuration then autofs will check each of the commonly used schema for a valid entry and if one is found it will used for subsequent lookups.

There are three common schemas in use:

nisMap

Entries in the nisMap schema are nisObject objects in the specified subtree, where the cn attribute is the key (the wildcard key is "/"), and the nisMapEntry attribute contains the information used by the automounter.

automountMap

The automountMap schema has two variations that differ in the attribute used for the map key. Entries in the automountMap schema are automount objects in the specified subtree, where the cn or automountKey attribute (depending on local usage) is the key (the wildcard key is "/"), and the automountInformation attribute contains the information used by the automounter. Note that the cn attribute is case insensitive.

The object classes and attributes used for accessing automount maps in LDAP can be changed by setting entries in the autofs configuration located in /etc/sysconfig/autofs.conf.

NOTE:

If a schema is given in the configuration then all the schema configuration values must be set, any partial schema specification will be ignored.

For amd format maps a different schema is used:

amdMap

The amdmap schema contains attributes amdmapName, amdmapKey and amdmapValue where amdmapName contains the name of the containing map, amdmapKey contains the map key and amdmapValue contains the map entry.

LDAP AUTHENTICATION, ENCRYPTED AND CERTIFIED CONNECTIONS¶

LDAP authenticated binds, TLS encrypted connections and certification may be used by setting appropriate values in the autofs authentication configuration file and configuring the LDAP client with appropriate settings. The default location of this file is /etc/autofs_ldap_auth.conf.

If this file exists it will be used to establish whether TLS or authentication should be used.

An example of this file is:

<?xml version="1.0" ?>
<autofs_ldap_sasl_conf


        usetls="yes"


        tlsrequired="no"


        authrequired="no"


        authtype="DIGEST-MD5"


        user="xyz"


        secret="abc"
/>

If TLS encryption is to be used the location of the Certificate Authority certificate must be set within the LDAP client configuration in order to validate the server certificate. If, in addition, a certified connection is to be used then the client certificate and private key file locations must also be configured within the LDAP client.

In OpenLDAP these may be configured in the ldap.conf file or in the per-user configuration. For example it may be sensible to use the system wide configuration for the location of the Certificate Authority certificate and set the location of the client certificate and private key in the per-user configuration. The location of these files and the configuration entry requirements is system dependent so the documentation for your installation will need to be consulted to get further information.

See autofs_ldap_auth.conf (5) for more information.

EXAMPLE¶

/-	auto.data
/home	/etc/auto.home
/mnt	yp:mnt.map

This will generate two mountpoints for /home and /mnt and install direct mount triggers for each entry in the direct mount map auto.data. All accesses to /home will lead to the consultation of the map in /etc/auto.home and all accesses to /mnt will consult the NIS map mnt.map. All accesses to paths in the map auto.data will trigger mounts when they are accessed and the Name Service Switch configuration will be used to locate the source of the map auto.data.

SEE ALSO¶

automount(8), autofs(5), autofs(8), autofs.conf(5), autofs_ldap_auth.conf(5)

AUTHOR¶

This manual page was written by Christoph Lameter <chris@waterf.org>, for the Dean GNU/Linux system. Edited by <hpa@transmeta.com> and Ian Kent <raven@themaw.net> .